LOW CUT CORE (High µ typ)/TRMH
Most suitable ferrite core for suppressing conductive noise at 1 MHz or less
TRMH Series / Low Cut Core
Most suitable ferrite core for suppressing conductive noise at 1 MHz or lessAusführungen
Features
- Due to the higher impedance in the frequency range of 1 MHz or less, the product is effective for suppressing conductive noise around 150 kHz.
- As the number of turns increases, the impedance improves and a better effectiveness of noise Suppression can be obtained.
- Resin coated core prevents from cables getting demaged by the edge of the core.
- The wide Variation of size is available. (Ø7.2~Ø87.9)
| Part No. | A | B | C | Impedance Ω/1MHz (1turn) |
|---|---|---|---|---|
| TRMH-16-8-16E | 16.9 | 7.2 | 16.8 | ≧ 18 |
| TRMH-20-10-10E | 21.0 | 9.2 | 10.9 | ≧ 11 |
| TRMH-25-15-12E | 25.9 | 14.1 | 12.8 | ≧ 9 |
| TRMH-31-20-15E | 32.1 | 19.0 | 15.9 | ≧ 9 |
| TRMH-38-19-13E | 39.1 | 18.0 | 13.9 | ≧ 11 |
| TRMH-47-27-15E | 48.3 | 26.0 | 15.9 | ≧ 10 |
| TRMH-65-38-30E | 67.3 | 36.6 | 31.1 | ≧12 |
| TRMH-74-46-20E | 75.76 | 44.22 | 21.0 | ≧6 |
| TRMH-103-66-25E | 105.6 | 63.1 | 26.9 | ≧6 |
| TRMH-160-90-26E | 165.1 | 87.9 | 28.1 | ≧6 |
Unit: mm
Download
Data sheet with all relevant information on dimensions, material, and electrical properties. Ideal for design, selection, and comparison.
Further data sheets, test reports, and 3D drawings can be found in the download area of Kitagawa Industries. Please note that you are leaving www.kitagawa.de. We accept no liability for external content. Applicable data protection regulations may differ from EU requirements.
Go to download area