LOW CUT FERRITE CLAMP / RFC-**MA
Ferrite clamp with excellent heat resistance, effective for prevention of conducted/radiated noise in low-frequency range
RFC-MA / LOW CUT FERRITE CLAMP
Ferrite clamp with excellent heat resistance, effective for prevention of conducted/radiated noise in low-frequency range.Ausführungen
Features
- Operating temperature: -40°C to 125°C
- Suitable for suppression of low-frequency noise (150KHz to 30MHz) of power supply systems.
- Split type Ferrite Clamp, making it easy to apply to assembled wires.
- Housing with anti-slip means for cable tie around its outer side.
- Highly reliable because of the lock of the housing as well as the fastening of the tie.*Excluding RFC-20MA
- The material of the plastic housing is UL-94V-2 certified.
- Vehicle ECU, inverter, low-frequency noise prevention by motor drive
Material
- Ferrite Core：Soft ferrite
- Housing：PA66 (Color：Natural／Flammability：UL94V-2）
| Part No. | A | B | C | Applicable cable diameter | Impedance Ω/10MHz (1turn) |
|---|---|---|---|---|---|
| RFC-8MA | 20.6 | 19.8 | 34.0 | Max. Ø 8.5 | ≧ 20 |
| RFC-13MA | 29.6 | 28.4 | 34.0 | Ø 12.5 ~ 13.5 | ≧ 20 |
| RFC-20MA | 40.0 | 40.0 | 47 | Max. Ø 20 | ≧ 20 |
Unit: mm
Download
Data sheet with all relevant information on dimensions, material, and electrical properties. Ideal for design, selection, and comparison.
Further data sheets, test reports, and 3D drawings can be found in the download area of Kitagawa Industries.
Go to download area