LOW CUT FERRITE CLAMP / MRFC / MRFC-H40/ MRFCK Series
Ferrite clamp for low-frequency range with UL-94-V0
MRFC / MRFC-H40/ MRFCK Series / Ferrite Clamp for low-frequency range with UL94V-0 housing.
FERRITE CLAMP for low-frequency range with UL94V-0 housing.Ausführungen
Features
- Effective solutions for suppression of disturbance from switching power supply and motor.
- Due to conditioning the ferrite material, the product is suitable for suppressing low frequency noise from 150kHz to 30MHz.
- With optional mounting fixture, the product can be assembled on enclosure by M4 screw.(MRFCK-13, MRFCK2-20)
- Fixing by M6 screw is available. (MRFC-H40)0).
Material
- Ferrite Core:Soft ferrite
- Housing:PA66 (Color:Light gray / Flammability:UL94V-0) ※MRFC-H40:PC/ABS (Color:Black / Flammability:UL94V-0)
Unit: mm
| Part No. | Applicable cable diameter | A | B | C | D | Impedance Ω/10MHz (1turn) |
|---|---|---|---|---|---|---|
| MRFC-8 | Max. Ø 8.5 | 20.1 | 20.4 | 31.5 | 35.5 | ≧ 20 |
| MRFC-13 | Max. Ø 13.5 | 29.1 | 33.05 | 32.3 | 37.1 | ≧ 20 |
| MRFC-20 | Max. Ø 20.0 | 40.3 | 40 | 47 | 53.5 | ≧ 20 |
Unit: mm
| Part No. | Applicable cable diameter |
|---|---|
| MRFCK-13 | Please refer to the Drawing below |
| MRFCK2-20 | Please refer to the Drawing below |
MRFCK-13
MRFCK2-20
Unit: mm
| Part No. | Applicable cable diameter | A | B | C | D | Impedance Ω/10MHz (1turn) |
|---|---|---|---|---|---|---|
| MRFC-H40 | Max. Ø 40.0 | Shown in dimensional drawing | ≧ 25 (1 MHz) | |||
Download
Data sheet with all relevant information on dimensions, material, and electrical properties. Ideal for design, selection, and comparison.
Further data sheets, test reports, and 3D drawings can be found in the download area of Kitagawa Industries.
Go to download area